|
MODEL
|
GX-300 |
GX-400 |
GX-500
|
|
Cutting method
|
|
|
Driving method
|
Digital control servo motor
|
|
Maximum cutting area
|
29 x 984-1/8"
(737 x 24,998mm)
|
39 x 984-1/8"
(1000 x 24,998mm)
|
47 x 984-1/8"
(1195 x 24,998mm)
|
|
Acceptable media width
|
2 to 36"
(50 to 915mm)
|
3-1/2 to 46"
(90 to 1178mm)
|
3-1/2 to 54"
(90 to 1372mm)
|
|
Maximum cutting speed
|
During cutting: 33ips (850mm/sec.) [in
all directions]
During tool-up: 47 ips (1202mm/sec) [in
45º direction]
|
|
Cutting force
|
|
|
Mechanical resolution
|
0.00049"/step (0.0125mm/step)
|
|
Software resolution
|
0.00098"/step (0.025mm/step)
|
|
Distance accuracy
|
Error of less than ± 0.2% of distance
traveled, or 0.00039 (0.1mm), whichever
is greater
|
|
Repetition accuracy
|
0.1mm or less (excluding
stretching/contraction of the material)
Range for assured repetition accuracy
For materials with a width exceeding 24"
(610mm): Length 157-7/16" (4000mm)
(GX-400/500 only)
For materials with a width of 24" (610mm) or
less: Length 314-15/16" (8000mm)
|
|
Interface
|
Serial (RS-232C compatible), USB (Rev.
1.1)
|
|
Buffer size
|
8MB (2MB for re-plot buffer)
|
|
Power supply
|
AC 100V to 240V +/- 10% 50/60Hz 1.2A
|
AC 100V to 240V =/- 10% 50/60Hz 1.1A
|
|
Power consumption
|
Approx. 95W
|
|
|
Acoustic noise level
|
Cutting mode: under 62 dB (A) Standby
Mode: under 40 dB (A) (According to ISO
7779)
|
|
Dimensions with stand
|
45-1/16(W) x 28-5/8(D) x 43-13/16"(H)
1144(W) x 727(D) x 1113mm (H)
|
55-3/8(W) x 28-5/8(D) x 43-13/16"(H)
1407(W) x 727(D) x 1113mm(H)
|
63-1/16(W) x 28-5/8(D) x 43-13/16(H)
1602(W) x 727(D) x 1113mm (H)
|
|
Weight with stand
|
97lb. (44 kg)
|
112.4lb. (51 kg)
|
|
|
Operating temperature
|
|
|
Operating humidity
|
35 to 80% (non-condensing)
|
|
Standard accessories
|
Power cord, blade, blade holder,
alignment tool, cable clamp, replacement
blade for separating knife, Roland
Software Package CD-ROM),startup guide,
user manual
|
